Belspray Concrete Cure Sprayers Contact Sales on +44 (0) 1243 781970
A fast, efficient, modern cost effective concrete cure sprayer designed to agitate the material, give a constant spray pattern and keep spraying year after year.
Working practices vary from company to company, so the Belspray range of sprayers has been designed to accomodate these difference. The Belspray motorised range offers you the choice of a pump unit, wheeled trolley or drum lift chassis and then the choice of your preferred engine type - Briggs & Stratton or Honda petrol engine or Yanmar diesel.
The Belspray range of concrete cure sprayers will give an even spray pattern and with the aid of a three-way valve and duplex suction pipe keep the concrete material agitated. Using low maintenance gear type pump, the Belspray sprayer has been designed to spray at rates up to 20 litres per minute.
Belspray Concrete Cure Sprayer Leaflet
BSCP Belspray Pump Unit
The pump unit that can be left in the back of a truck with the drums. This unit comes with 30metres of hose and is available with a Briggs & Stratton or Honda petrol engine or a Yanmar diesel engine
Specification for BSCP Con-Cure
- Tubular frame with anti-vibration mount feet
- Albany crown gear type pump
- Choice of petrol engines: Briggs and Stratton or Honda
- Yanmar diesel electric available
- Duplex suction pipe with agitator jets and hoses
- 30m delivery hose (in 3 x 10m assemblies)
- 3m x 3/8" (10mm) lance with 3/8" (10mm) brass spray jet
BSCW Belspray Classic Sprayer
The Classic comes with a four wheeled trolley chassis which requires the drums to be lifted on. It is available with either a Briggs & Stratton or a Honda petrol engine.
Specification of BSCW Con-Cure
- 4-wheeled welded trolley chassis
- Albany crown gear type pump
- Choice of petrol engines: Briggs and Stratton or Honda
- Duplex suction pipe with agitator jets and suction hoses
- 5m delivery hose
- 3m x 3/8" (10mm) lance with 3/8" (10mm) brass spray jet
- Optional extra: Additional length of hose
BXCW Belspray Drum Lift Chassis
The newest Belspray incorporates drum lifting equipment in line with current lifting regulations in the UK. This model is available with all three engine options - Briggs & Stratton or Honda petrol engine or Yarmar diesel.
Specification of BSCW Con-Cure
- 3-wheeled Strong Arm drum mover chassis
- Albany crown gear type pump
- Choice of petrol engines: Briggs and Stratton or Honda
- Yanmar diesel electric available
- Duplex suction pipe with agitator jets and suction hoses
- 5m delivery hose
- 3m x 3/8" (10mm) lance with 3/8" (10mm) brass spray jet
- Optional extra: Additional length of hose
A note of caution: "Can the Belspray motorised sprayers for concrete curing material spray Proseal and Proseal 90 - curing material from SIKA Armorex?" BX Plant has been asked this question on more than one occasion. The answer is yes. It does! The sprayer has been tested in our works at Chichester using Proseal 90. It sprayed the material without difficulty.
And then we went to clean the sprayer - but before we did, we tested the Proseal with petrol, white spirit and water - all of which had an immediate reaction with the Proseal.
After having sprayed Proseal or Proseal 90 only SIKA Thinners C or Gunwash Thinners should be used to clean the sprayer.
Do not use petrol or white spirit unless you enjoy stripping down and cleaning the Belspray sprayers.
Further details about Proseal and Proseal 90 can be found on the Sika website: www.sika.co.uk
Whatever you call them - Proseal sprayer or con-cure sprayer,
We just call them Belspray! Belspray sprayers - Designed by Mr Hubert Graham Bell.
Discover how to spray more in less time and keep within specification.
Using a Belspray direct-from-drum motorised sprayer for bitumen emulsion
or concrete cure material can save both time and money.
We ship Worldwide Contact Sales on +44 (0) 1243 781970
All our sprayers are manufactured in the UK.